1997 Johnsoon Evinrude "EU" 50 thru 70 3-Cylinder Service Manual, P/N 507266, Page 216Get this manual
Assembly
INote Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable conditionRefer to Cleaning and Inspection, Page 6-4After the gearcase has been thoroughly cleaned and inspected, install new pinion bearing in the gearcase as follows:
!-_DR5283
1Assemble the following components of OIIIC Pinion Bearing Remover and Installer, PIN 391257, as showninHex Head Screw PIN 326584 Spacer in0.0Flat Washer PIN 326582 Rod PIN 326575 Installer -20 inHex Head Screw PIN 391260 Plate
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OIIIC Needle Bearing Assembly Grease to hold the bearing on the tool3Insert the tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer on the tool contacts the spacerCOA3082