1997 Johnson Evinrude "EU" Electric Outboards Service Manual, P/N 507260, Page 167Get this manual

1997 Johnson Evinrude "EU" Electric Outboards Service Manual, P/N 507260, Page 167

1224-Volt Selector Switch Service

Removal

1Remove the rubber boot2Remove the switch nut3Unsolder the electrical wires from the switch

Installation

1Solder wires to switchThe speed control RED wire to the center terminal and the battery RED wire to the bottom terminalUse diagram at end of section for routing2Install switch in the foot pedal baseThe WHITE wire must be toward the top of the pedal base

Back to 1997 Johnson Evinrude "EU" Electric Outboards Service Manual, P/N 507260