1997 Johnson Evinrude "EU" Electric Outboards Service Manual, P/N 507260, Page 164Get this manual
Speed Control Switch ServiceExcept HBF2 [I]
Removal
1Push plastic shaft back from the switch with flat blade screwdriver2Loosen the nut retaining the speed control switch
(] 3Remove the switch from the mounting bracket and unsolder wires[] 4If required, the speed control wheel can be removed by pushing the plastic shaft out of the wheel and pedalInstallation
rn section forthe switch wires using thelocationsat the end of 1Attach diagram this correct wire routing and