1997 Johnson Evinrude "EU" Electric Outboards Service Manual, P/N 507260, Page 163Get this manual
ONOFF Switch ServiceAll Models Removal
1Remove screw retaining the switch and bracket
rn 2UnsolderP.W.Mmodel)RED wires from the switch (two and remove two BROWN wires,
3Remove rubber boot from the switch
4Remove nut retaining the switch to the bracketSave fiber washer and O-ringInstallation
[] 1Reinstall fiber washer and O-ring on the new switch
rnshown on wiring(or BROWN) the end of this sectionwires 5Solder RED wires to the switchRoute as diagram at
INote Use only rosin core solderDo not use acid core solder6Coat solder terminals with OMC Black Neoprene Dip