1997 Johnson Evinrude "EU" Electric Outboards Service Manual, P/N 507260, Page 123Get this manual
Installation
1Clean the threaded area of the motor tube using CIVIC Cleaning Solvent[] 2Standard ModelsInstall motor tube seal into adapterApply RTV adhesive sealant to top of seal
3Spray OMC All-Purpose Marine Cleaner on the motor tube wires to provide lubrication
4Pull the motor tube wires through the motor tube5Temporarily attach motor to adapter
6Apply OMC Ultra Lock to the threads of the motor tube
7Tighten adapter on motor tube8Align adapter set screw hole with existing dent in motor tube to set approximate motor alignment9Set motor offset using the Motor OffsetAll Models procedure in this section