1997 Johnson Evinrude "EU" Electric Outboards Service Manual, P/N 507260, Page 58Get this manual

1997 Johnson Evinrude "EU" Electric Outboards Service Manual, P/N 507260, Page 58

Continuity TestPositive Circuit1224-Volt Standard Foot Control Models
INote To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity2Move 1224-Volt switch to "24 V" position3Connect one meter lead to RED battery cable

4Connect second meter lead at 1224-Vo It switch:

to RED 12-Gabattery cable

The meter must show continuity If meter shows no continuity, repair connection or replace battery cable
5Move 1224-Volt switch to "12 V" position6Move first meter lead to WHITE battery cable 9852

rn 7.atConnect second meter lead to WHITE 12-Gabattery cable 1224-Volt switch:

Back to 1997 Johnson Evinrude "EU" Electric Outboards Service Manual, P/N 507260