1997 Johnson Evinrude "EU" Accessories Service Manual, P/N 507270, Page 98Get this manual

1997 Johnson Evinrude "EU" Accessories Service Manual, P/N 507270, Page 98

v DRC6245 DRC6246

Trim Gauge Troubleshooting

1Turn key switch ON Using voltmeter, check for voltage between the trim gauge "1" and "G" terminals If no voltage, check condition of instrument harness, key switch, and engine 20-amp fuse
If voltage, go to Step 2
2Remove the whitetan lead from the trim gauge "S" terminalWith key switch ONgauge should indicate full-trim DOWN positionNow connect jumper wire between the white tan lead and the trim gauge "G" terminalGauge should indicate full -trim UP position If your results are different, replace the trim gauge If your results agree, refer to Trim Sender Troubleshooting

Back to 1997 Johnson Evinrude "EU" Accessories Service Manual, P/N 507270