1997 Johnson Evinrude "EU" Accessories Service Manual, P/N 507270, Page 51Get this manual
10Lubricate the neutral warm-up rod and shift lever supportInstall the two springs and warm-up rod in the support
The warm-up rod springs can fly out of position and cause an injury or become lostHold warm-up rod down and hold springs in place until they are held in place by shaft support in Step 12&
11Lubricate inside surface of the shaft supportPlace the shaft support on the shaft and press firmly
lTIl12together
13Install the washer and retaining ring on the shaft
14Lubricate the spacer and roller Install the spacer over the shaft and the roller on the pin15Lubricate the slots in the throttle camInstall the screw with washer through the cam and bushing and align cam groove with the roller Install the throttle cam and secure with nutTorque to 25-35 inIbs(2,8-4,0 Nm)