1997 Johnson Evinrude "EU" Accessories Service Manual, P/N 507270, Page 35Get this manual
Trim Switch ReplacementInstallation
1The wires molded into the trim switch are off-centerPosition them toward the top of the handle and place switch into the coverInstall new retaining clip by pushing it into the switch's recess until it seats and locks switch firmly in position
[]] 2Insert trimtilt leads through hole in lockout lever as shown[]] 3Insert one wire into the slots on one side of the coverInsert two wires into the slots on the opposite side, as shown
[]]4Reinstall the lockout lever and lockout spring []!I
Wear safety glasses and use caution when installing lockout lever and springThe spring is compressed and can fly out, causing injury5Route trim switch lead through hole in handlePlace cover on handle and retain with two screwsTighten screws securely6Route trim switch wires through mounting plate