1997 Johnson Evinrude "EU" 90 thru 115 90 CV Service Manual, P/N 507267, Page 227Get this manual

1997 Johnson Evinrude "EU" 90 thru 115 90 CV Service Manual, P/N 507267, Page 227

Starter Circuit Check
INote Battery must be fully chargedStep Procedure Remove black lead from ground at CDConnect voltmeter between CD and common engine groundTurn key to START positionVoltmeter should show battery voltageConnect meter at Turn key to START positionResult aIf no reading, go to Step

II Check voltage between ground

Steps" thru Remove starter to solenoid cable from Q) to prevent starter engagement while making checks

bIf meter reads battery voltage, reconnect black lead to ground and go to Step

II Check voltage between ground
INote Steps II thru IITurn key
OFF before connecting and disconnecting meterTurn key to START position after connecting Check voltage between ground andConnect meter at Turn key to START position
aIf meter reads battery voltage, lead is open between CD and

Back to 1997 Johnson Evinrude "EU" 90 thru 115 90 CV Service Manual, P/N 507267