1997 Johnson Evinrude "EU" 90 thru 115 90 CV Service Manual, P/N 507267, Page 216Get this manual
1 Assembly
m 1.reverse gatebushingsand shafts todisassembly, If the reverse gate was removed during jet housinginstall
Position shafts so holes align with holes where retaining screws make contact
2Torque screws to 60-84 inIbs(7-9 Nm)After installation, check to make sure the reverse gate moves freely
m 3Place any other position.position shownThe roller will not roller into cam in assemble in
4Place cam roller on reverse gate stud, and torque nut to 60-84 inIbs(7-9 Nm)5Install bushing