1997 Johnson Evinrude "EU" 90 thru 115 90 CV Service Manual, P/N 507267, Page 197Get this manual
m 7V4Install new seal in bearing housing using OMC Seal Installer, PI 342665Apply DPL Penetrating Lubricant to the casing of the seal before installing Install the seal with the exposed lip facing away from the bearing housingPress the seal into the housing until the tool seatsApply OMC Triple-Guard grease to the seal lips after installing
8V6Install new seal in rear ofthe bearing housing using OMC Seal Installer, PIN 341439Apply DPL Penetrating Lubricant to casing of the seal before installingInstall the seal with exposed lip facing away from the bearing housingPress the seal into the housing until the tool seatsApply OMC Triple-Guard grease to the seal lips after installing
9Lightly apply OMC Triple-Guard grease to new bearing housing O-ringInstall the O-ring(s) in its groove in the housing V4Install new seals on the retaining screws