1997 Johnson Evinrude "EU" 90 thru 115 90 CV Service Manual, P/N 507267, Page 179Get this manual
Tilt Tube Servicing Removal
Support the motor with suitable hoist1Pull locking tabs on tilt limit cam loose from collar
rn 2Remove cam and collar from tilt tubeI]]
3Remove the nut from the starboard side
INote avIC Steering Tube Service Kit,
PIN 434523, includes the spacer and adapter required in the next steps
rn 4Thread the spacer onto the starboard end of the tilt tube5Thread the adapter onto the port end of the tilt tube[] 6Thread avIC Slide Hammer, PIN 432128, into the adapter until at least in(51 mm) of thread are engaged7Pull the tilt tube from the stern bracket with the slide hammerWhen the tilt tube clears the port stern bracket, remove the tilt tube from the spacer