1997 Johnson Evinrude "EU" 90 thru 115 90 CV Service Manual, P/N 507267, Page 171Get this manual

1997 Johnson Evinrude "EU" 90 thru 115 90 CV Service Manual, P/N 507267, Page 171

7Remove the screws, stern bracket to trim manifold, and remove the trim and tilt unitAssembly
INote Before

proceeding, be sure all components have been thoroughly cleanedReplace any seals that have been removedInspect all thrust washers and bushings for evidence of deterioration
[] 1Install an upper steering shaft bushing, lower seal, and upper seal in the swivel bracketBoth seal lips face out Coat seals' outside diameter with ONIC Gasket Sealing Compound Coat the bushing and seal lips with ONIC Triple-Guard grease2Install the trim and tilt unitApply ONIC Loequie Primer and ONIC Nut Loekto the threads of screws, stern bracket to trim manifoldInstall them loosely

Back to 1997 Johnson Evinrude "EU" 90 thru 115 90 CV Service Manual, P/N 507267