1997 Johnson Evinrude "EU" 90 thru 115 90 CV Service Manual, P/N 507267, Page 50Get this manual
Heli-Coillnserts and Installers
rn Use The installationinserts on all of drill, to repair damaged these Heli-Coil models threadskit consists tap, and insertion
INote The 14
mm spark plug inserts are specially made for use in aluminum cylinder headsDo not use substitutes
Installation Instructions 1Drill to adequate depth using drill size supplied with kit2Use Heli-Coil tap supplied with packCheck thread size on shank to make certain proper size is used3Screw insert onto mandrel until tang is fully engaged in driving contour4Screw insert into tapped holeTop of insert must be onequarter to one-half turn below top surface5The tang must be removed to allow full passage of screw into the insertThe tang may be broken off cleanly at the notch in the bottom coil with punch or rod having diameter that just fits into the assembled insertMake sure that the punch or rod has square end (no chamfer)Place punch or rod into assembled insert until it rests on tangHolding tool squarely, strike it sharply with hammerC03603