1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 311Get this manual

1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 311

Trim Sending Unit AdjustmentFasTrak 1Tilt the engine and engage the mooring bracket

2Temporarily, install PIN 387278 thrust rod in the No.3

rn 3Loosen thebesending unit screws until only snug, so the sending unit can pivoted4Disengage the mooring bracketLower the engine against the thrust rod

5Observe the trim gaugeIf the needle does not show center positiontilt the engine up and adjust the sending unit by pivoting it up or down6Lower the engine against the thrust rod to verify adjustmentRepeat Step 5, if necessary

Back to 1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268