1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 243Get this manual
28Install new seal in the bearing housing using OM: Seal Installer, PIN 341439Apply oil to the casing of the seal before installingInstall the seal with exposed lip facing away from the bearing housingPress the seal into the housing until the tool seats29Apply ONIC Triple-Guard grease to the seal lips after installing
30Apply ONIC Needle Bearing Assembly Grease to the thrust bearing Position bearing around shoulder on the propeller shaft31Apply ONIC Needle Bearing Assembly Grease to the thrust washer Place washer in recess of bearing housing32Coat beari ng su rfaces of propeller shaft with gearcase oilSlide the propeller housing on the propeller shaft