1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 241Get this manual
29 31951
11If removed, install new forward gear bearingApply CWIC Needle Bearing Assembly Grease to 25 new rollersInstall the rollers in the bearing
12911301 1271 1261
12Using OVIC Bearing Installer, PIN 339778, install the bearing, lettered side facing tool13Install the thrust bearing on the forward gear14Place the bearing housing on the forward gear
15Install 0.030 inof shims and the thrust bearing in the flange, and install on the forward gear
16Install set screws and torque to 144-168 inIbs(16-19 Nm)Use no thread sealant17Anchor dial indicator gauge to flat, level surface
1331 1331
18Position the gear assembly so the indicator needle makes contact with the flange on the housingThe indicator needle must be parallel with the side of the gear housing and perpendicular to the table surfaceZero the dial indicator19Grip the bearing housing 1800 apart and pull up to get reading on the indicatorTo determine thickness of shims; use the following example: 0.030 inof shims in the assembly0.020 inyour reading on the dial indicator