1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 234Get this manual
Installation
rn topCoat the driveshaft splinesas lubricantMoly Lubeprevent 1with CJv1C Do not coat surface of the driveshaft here may
seating of the driveshaft in the crankshaft
m 2Apply CJv1C Adhesive Position twotonew seals exhaust sealant the lower on the housing seals' inner surfaces housingApply ow: Triple-Guard grease to the seals' outer surfaces and position the housing on the gearcase
3Rotate the propeller shaft and shift the gearcase to FORWARDSlide the gearcase into place, making sure the driveshaft engages the crankshaft, the water tube enters the water pump, and the lower inner exhaust housing does not slip out of position
COA3139
4Apply ow: Gasket Sealing Compoundto threads of the gearcase retaining screwsInstall the screws and tighten to the following torques: