1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 228Get this manual

1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 228

11Check shimming by reassembling the driveshaft with shims and placing it back into the tool baseThe measurement between the gauge bar and the pinion should be 0.020 in(0,508 mm)12Remove the nut and pinion from the driveshaftAssembly
INote Before beginning assembly procedures, all gearcase com-

ponents must be thoroughly cleaned and in serviceable condi tionRefer to Cleaning and Inspection1Assemble the following components of OMC Pinion Bearing Remover and Installer, PIN 391257, as shown:

m V4-20 0.0.Flat Hex Head Screw in inWasher
PIN 391260 Plate
PIN 326582 Rod PIN 326574 InstallerlRemover -20 V2 inHex Head Screw Not component of PIN 391257

341437 Spacer

V6-20 112 inHex Head Screw CD in0.0Flat Washer Q) PIN 326584 Spacer PIN 3265741nstallerRemover PIN 326587 Washer (1116 134 in0.0 PIN 391260 Plate and Bearing PIN 326582 Rod -20 inHex Head Screw

Back to 1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268