1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 226Get this manual
11 14156
5Lightly apply OMC Tripe-Guard grease to new a-ringInstall the a-ring in top groove of the bearing housing
NoteDo not install the a-ring in the bearing housing's bottom grooveThe bottom groove is an oil passageGearcase damage could resultDriveshaft Servicing
1To separate the upper driveshaft from the lower driveshaft, remove the roll pinReplace the damaged component2To assemble the driveshaft, install the driveshaft retainer into the groove of the upper driveshaft
3Install the upper driveshaft into the lower driveshaft, aligning the holes in the driveshaft retainer and the lower driveshaft
rn [[] 4Install the roll pin:
V4flush V6to dimension shown Driveshaft Shimming Using Tool, PIN 393185