1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 225Get this manual
(]] 7V4Use CJ1IIC Seal Installer, PIN 342665 to install new seal in rear of the bearing housing Apply DPL Penetrating Lubricant to the casing of the seal before installingInstall the seal with the exposed lip facing away from the bearing housing Press the seal into the housing until the tool seatsApply OMC TripleGuard grease to the seal lips after installing (]] 8V6Use CJ1IIC Seal Installer, PIN 341439, to install new seal in the rear of the bearing housingApply DPL Penetrating Lubricant to the casing of the seal before installingInstall the seal with the exposed lip facing away from the bearing housingPress the seal into the housing until the tool seatsApply OMC TripleGuard grease to the seal lips after installing DRC5720
9Lightly apply O'JIC Triple-Guard grease to new bearing housing O-ring(s)Install the O-ring(s) in its groove in the housing
Driveshaft Bearing Housing Service