1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 205Get this manual
Installation
1If removed, slide the protective sleeve over the throttle cable and secure with tie-strap
m 2Apply OMC Triple-Guard greasesteeringtwo steering handle to the bushingsPlace the bushings into the bracketAttach the
steering handle to the steering bracketTighten the screw so the steering handle can be pivoted and maintain any position
rn 3Route throttle cable through opening grommet in the lower motor coverPlace the cable into the control cable
Move throttle grip to the SLOW position and the throttle shaft to the full closed positionTurn the cable adjustment barrel until it can set in the bracket pocket[] 4Install the anchor block cover and screw Torque screw 60-84 inIbs(7-9 Nm)