1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 172Get this manual
8Bend the inside loop of the rewind spring in toward the center of the starter housingEngage the slot CD of the pulley with the inner loop of the rewind spring and install the pulley in the starter housing
[[] friction platesthe on the pulley springSecure the friction plate rn 9Place friction plate hubwasher Q) between the two
and friction plate spring washer with the pulley lock ring (0
10Be sure the starter pawl bushing is installed in the pulleyApply 0nC Triple-Guard grease or Lubriplate 777 to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the starter pawl in the pulley11Position the starter housing spring housing
in the starter