1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 148Get this manual
Temperature Switch Test Purpose One heat sensitive switch is installed in each cylinder head to monitor engine temperatureBoth switches are connected in series with the warning systemIf either switch senses temperature in excess of predetermined limit, contacts close and cause the System Check gauge "WATER TEMP" light to turn on and the warning horn to sound for ten seconds
INote To ensure that the temperature sensing system can
alert the operator during an overheating condition, test the warning system as described in Section 7, System Check Engine Monitor
Testing
1Separate the connector and remove the temperature switch from the cylinder head
2Using continuity light or ohmmeter, make positive connections to the switchone lead to the switch lead and one lead to the metal portion of the switch