1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 124Get this manual

1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 124

DR42210

Amphenol Connector Servicing

INote The Amphenopin and socketterminals are not the same
size as Deutsch pin and socket terminals You cannot interchange themTerminal Removal

1To remove terminal from the plug or receptacle, lubricate both ends of the cavity with isopropyl alcohol

Pick the proper tool for the service being performed:

OMC OMC OMC OMC

Pin Remover, PIN 322698 Socket Remover, PI 322699 Crimping Pliers, PI 322696 Insert Tool, PIN 322697

2Place the plug or receptacle against the edge of flat surface with clearance behind connector for terminal to be pushed outPush terminal from connector with tool or rn [!] 3Pinin(6 socketinsulation from wirereplaced if damand terminals may be agedStrip mm) and crimp new

Back to 1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268