1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 115Get this manual

1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 115

Installation
INote Remove any varnish from both sides ofthe stator retaining
screw holesThe stator must have metal to metal contact with the cylinder block and its retaining screws[] 1Guide the connector wires through the hole in the cylinder block, align the stator roll pin with the hole in the cylinder block, and seat the stator[] 2Seat grommet in hole in cylinder block[] 3Remove old adhesive from threads of the stator screwsPrime with OMC Locquic Primer and let dryApply OMC Nut Lock to threadsInstall the screws and tighten to 120-144 in lbs(14-16 Nm)[] 4Using tie straps, secure the stator wiring harness to the engine wiring harness

Back to 1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268