1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 45Get this manual

1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 45

Throttle Plate Synchronization

1Remove the air silencer assembly
rn 2Loosen the spark lever screw III 3Push the spark lever roller rearward
rn 4Verify that the throttle touching9 6

cam and cam roller are not

[] 5Remove fuel filter from bracket and loosen the carburetor link screw
[]] port throttle shaft inhex headscrews .loosen the starboard rn 6Using connector wrench, Do not remove the and
screw from the connector7Seat all throttle platesTighten all throttle shaft connector screws[] 8Carefully tighten the carburetor link screw while supporting the linkage in position Install fuel filter to bracket9Leave the spark lever screw loose for the next adjustmentINotel Light pressure should be applied to throttle plates during this procedure to ensure that they remain completely closed

Back to 1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268