1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 41Get this manual

1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268, Page 41

Idle Timing
1Remove the rectifierregulator cover

2Disconnect the timing sensor plugAttach the OMC Ignition Analyzer from OIVIC Ignition Test Kit, PIN 434017, to the timing sensor
rn 3Move the analyzer selector switch to position:

4Connect the analyzer to 12-volt source

5Loosen the timer base detent screw
6Move both the inside and outside detent tabs completely forward on the detent plate
78e sure the timer base lever is against stop on the flywheel cover8Rotate the crankshaft in clockwise direction until the timing pointer aligns with the idle timing listed in chartIdle Timing

Back to 1997 Johnson Evinrude "EU" 90, 105RW, 115, 150, 150W, 175 60 LV Service Manual, P/N 507268