1997 Johnson Evinrude "EU" 9.9 thru 30 2-Cylinder Service Manual, P/N 507263, Page 311Get this manual
12If cup won't pull up over ring, use screwdriver or similar tool to compress ring and pry cup up over ring13Install protective cap over armature shaft and spacer
14Refer to No Load Current Draw, Electric Starter to check starter operationInstallation
1Position the starter bracket on the powerheadSecure the starter bracket using the two screws with washers and the locknut with washerBe sure to install the ground lead and lock washers on the lower screwTighten the screws and locknut to 60-84 inIbs(7-9 Nm)2Attach the vertical throttle shaft to the powerhead with the clamp and two screws3Secure all the solenoid leads to the solenoidApply OIYIC Black Neoprene Dip to all connections except the battery" +" cable and terminal4Reconnect the battery cables at the battery38534