1997 Johnson Evinrude "EU" 9.9 thru 30 2-Cylinder Service Manual, P/N 507263, Page 289Get this manual
Installation 1Inspect the starter mountIf the mounts are damaged or worn, replace as follows: Remove the mount using crescent wrenchApply OtIC Locquic Primer and OMC Screw Lock to threads of new mount
Tighten mount securely2Install caps on starter mounts
3Install the starter lockout cable into the starter housing
4Position the starter assembly onto the motorInstall the three starter housing retaining screwsThe short screw CD is installed on the port side of the starter housingTighten screws to torque of 48-72 inIbs(5,4-8 Nm)