1997 Johnson Evinrude "EU" 9.9 thru 30 2-Cylinder Service Manual, P/N 507263, Page 288Get this manual
8Bend the inside loop of the rewind spring in toward the center of the starter housingEngage the pin of the pulley with the inner loop of the rewind spring and install the pulley in the starter housing
9Lightly apply O'JIC Triple-Guard grease or Lubriplate 777to the spindle bushing and pawl pins on the pulleyInstall the bushing and the shim into the starter pulleyNext install the friction platelinks, and pawlsSecure the pawls with the retaining clips
10Lightly apply O'JIC Triple-Guard grease or Lubriplate 777 to the spindleInstall the spindlefriction ringand two spring washers
INotel The flat section of the friction ring and spindle be aligned