1997 Johnson Evinrude "EU" 9.9 thru 30 2-Cylinder Service Manual, P/N 507263, Page 282Get this manual
Starter Servicing9.915 Removal
1Avoid accidental starting of engine while servicing; twist and remove all spark plug leads
2Loosen starter lockout cam screw several revolutionsRemove the three starter retaining screwslink from lockout camLift starter from
m 3Remove powerheadDisassembly
m 1To service lockout assembly, remove the retaining pinm 2Remove the plunger, the cam .tappet, and cam from the spring, housing, and the screw from
&Wear safety glasses while disassembling and assembling manual starters because of rewind spring tension[] 3Pull the starter rope out far enough to tie slipknot in the ropePry the starter rope anchor out of the handleRemove the handle, release the slipknot, and let pulley slowly wind up rope until the rewind spring is completely unwound[[) 4Remove the retaining ring, and lift the pawl and links as an assembly