1997 Johnson Evinrude "EU" 9.9 thru 30 2-Cylinder Service Manual, P/N 507263, Page 231Get this manual
16Remove the shift rod bushing as follows: Position eM: Shift Rod Bushing Remover, PIN 327693, under the shift rod bushing Thread the adapter of the Universal Slide Hammer, PIN 391008, in the slide hammerPlace the adapter through the shift rod bushing and thread into the remover tool Remove the handle from the remover toolThen remove the bushing from the gearcase Once the bushing has been removed from the gearcase, examine the bushing for damageIf damaged, replace the bushing on reassemblyRemove and discard the O-ring from the bushing11!l17Using eM: Puller Bridge, PIN 432127, and eM: Small Puller Jaws, PIN 432131, remove the two driveshaft sealsDiscard the seals1&==-::-1