1997 Johnson Evinrude "EU" 9.9 thru 30 2-Cylinder Service Manual, P/N 507263, Page 207Get this manual
[]] 13Remove the lower thrust mount and shift rod grommet 14Refer to Cleaning and Inspection at the beginning of this section Assembly and Installation
[] 1Install the lower thrust mount, and shift rod grommet to the exhaust housing[] 2Apply GE RTVadhesive and install the two upper mountsApply OMC Nut Lock to the four upper mount retaining screws and torque to 60-84 inIbs(7-9 Nm)
3Place the upper thrust mount and plate in position on the swivel bracket assembly
[] 4Clean all sealant from the threads on the two upper mount to steering bracket screwsApply OMC Nut Lock to threads of screwsPosition the swivel bracket assembly on the exhaust housingInstall the two upper mount screws and tighten to torque of 18-20 ftIbs(24-27 Nm)Install caps with new 0rings and torque screws to 60-84 inIbs(7-9 Nm)
aID 5Place the lateral mounts in the lower mount brackets[!!]