1997 Johnson Evinrude "EU" 9.9 thru 30 2-Cylinder Service Manual, P/N 507263, Page 166Get this manual
9Tiller ModelsSeparate the 5-pin Amphenol connectorRemove the stop switch wire from terminal "E"Remove stop switch ground wire from ignition coil
[] 10Remove the shift leverInsert paper clip into plunger and remove the pin and washer from the actuator cam linkDisengage the link from the shift actuator cam11Remove the ground lead from the powerhead
12Using CJv1C Special 12 inBox Wrench, PIN 322700, remove port and starboard powerhead retaining nuts with washers
13Remove the four screws retaining the powerhead to the exhaust housing14The powerhead now can be removedIt may be necessary to rock the powerhead sideways to break the gasket loose