1997 Johnson Evinrude "EU" 9.9 thru 30 2-Cylinder Service Manual, P/N 507263, Page 158Get this manual
[[] 8Bend lock tab back and remove screwRemove lock tab from shift arm[]] 9Remove shift arm and spacer 10Remove the cotter pin, pin and shift leverRemove the two shift arm bushingsInstallation
1Install the two shift arm bushingsInstall the pin and shift lever, and secure with cotter pin
[] 2Install the shift arm and spacer[] 3Position lock tab on shift arm and install screw securelyBend tab onto screw[] 4Place detent springs in position and secure with screw[] 5Install shift rod and retain with pinInstall grommet