1997 Johnson Evinrude "EU" 9.9 thru 30 2-Cylinder Service Manual, P/N 507263, Page 118Get this manual
Ignition Component Replacement 1To avoid accidental starting of engine while servicing, twist and remove all spark plug leads&
rn 4Loosen the ignition plate screwsLift the ignition plate from the powerhead[!]
5Remove the plate from the bottom of the ignition plate6Remove the leads from the spiral wrap and from the ignition component7Apply OMC Ultra Lock to the threads of the component
2Remove the screws retaining the ignition component that is being replaced3Remove the wire clamp from the ignition plate
retaining screwsLoosely install the new ignition component on the ignition plate
m 8Route leads and install clampplateand spiral wrapINote All component leads must be routed through clamp and