1997 Johnson Evinrude "EU" 9.9 thru 30 2-Cylinder Service Manual, P/N 507263, Page 116Get this manual
Ignition Plate Servicing9.915 Removal 1To avoid accidental starting of engine while servicing, twist and remove all spark plug leads2If equipped, remove the manual starterSee Section 7&
3Remove the flywheelRefer to Flywheel Servicing4Loosen the six screws attaching the ignition plate to the retainer plateLift the ignition plate from the powerhead
rn support plate from the powerheadLift the retainer 5Remove the four support plate screws and
Installation 1Place the retainer plate, then the support plate on the powerheadAlign support plate with four screw holes in powerheadApply (lIt1C Nut Lock to threads of the four support plate screws Insta" the screws and tighten them to torque of 48-60 inIbs(5-7 Nm)2Apply (lIt1C Moly Lube to the crankcase boss