1997 Johnson Evinrude "EU" 40 thru 55 2-Cylinder Service Manual, P/N 507265, Page 248Get this manual
Assembly
m 1reverse reverse gate was ,and shafts todisassembly, If the removed during install gatebushings jet housingPosition shafts so holes align with holes where retaining screws make contact2Tighten screws to 60-84 inIbs(7-9 Nm)After installation, check to make sure the reverse gate moves freely3Place roller into cam in position shownThe roller will not assemble in any other positionrn
W 4Place cam roller on reverse gate stud, and tighten nut to
60-84 inIbs(7-9 Nm)5Install bushing
eccentric nutand cam screw
Before tightening cam screw, adjust reverse gateRefer to Gate Adjustment