1997 Johnson Evinrude "EU" 40 thru 55 2-Cylinder Service Manual, P/N 507265, Page 162Get this manual

1997 Johnson Evinrude "EU" 40 thru 55 2-Cylinder Service Manual, P/N 507265, Page 162

53Install starboard lower engine cover mount bracket and torque screws to 60-84 inIbs(7-9 Nm)54Install the complete ignition, electrical, and fuel systems
&To prevent possible fire or explosion, make sure all electrical
Installation

and ignition wiring is routed and clamped in its original position
1Position new powerhead gasketDo not use sealer on the gasket2Coat driveshaft splines with OMC Moly LubeDo not coat top surface of driveshaft as lubricant here may prevent seating of driveshaft in crankshaft3Lower the powerhead assembly into place

rn 4.powerhead retaining Sealing Install and torque the screws Apply OMC Gasket Compound to threads of the eight screws

Back to 1997 Johnson Evinrude "EU" 40 thru 55 2-Cylinder Service Manual, P/N 507265