1997 Johnson Evinrude "EU" 40 thru 55 2-Cylinder Service Manual, P/N 507265, Page 127Get this manual

1997 Johnson Evinrude "EU" 40 thru 55 2-Cylinder Service Manual, P/N 507265, Page 127

STEPSTOP CIRCUIT TEST
Elimination Test

& To avoid possible shock hazard, do not handle ignition coils or spark tester during cranking tests1Disconnect 5-pin Amphenol connector between ignition plate and power pack
rn 2Insert jumper wires between the "A", "8", "C", and "0" terminals of the 5-pin connector,
3Crank engine and observe results at spark tester: If spark now jumps alternately at each gap, the problem is in the stop circuitGo to Ohmmeter TestStop Button or Ohmmeter TestKey Switch If there is no spark at one gap, go to STEPPOWER PACK OUTPUT TEST If there is no spark at both gaps, go to STEPCHARGE COIL TEST

Back to 1997 Johnson Evinrude "EU" 40 thru 55 2-Cylinder Service Manual, P/N 507265