1997 Johnson Evinrude "EU" 40 thru 55 2-Cylinder Service Manual, P/N 507265, Page 110Get this manual
Ignition Coil Tests A wide variety of ignition testers are available from various manufacturersIn addition, some automotive testers having the proper specifications can be usedDetailed instructions for the use of any tester are provided with the unit, therefore, only general information is given hereRefer to the manual of the ignition tester you are using for coil specificationsSpecifications will vary among testersIgnition coil must be removed from powerhead for power and leakage testingDR4037
avoid possible shock hazards and to prevent leakage, perform all tests to the coil on wooden or insulated bench topSpecifications
Primary Resistance Secondary Resistance Operating Amps (MaxI Analyzer Polarity
Mere-O- Tronie
Magneto C.DCoil PIN 583740
1.5 amps 0.1 0.05
Stevens
Normal 1.1 amps
Ohmmeter Test Resistance tests can be performed while the ignition coil is still mounted to the powerhead1Twist and remove the spark plug and primary leads from the ignition coilDR4081