1997 Johnson/Evinrude EU 25, 35 HP 3-Cylinder outboards Service Manual, Page 214Get this manual
Starter Servicing Removal
1Avoid accidental starting of engine while servicing; twist and remove all spark plug leads2Disconnect low oil lead two-pin connector from engine harness3Remove the three starter retaining screws and washers link from lockout camLift starter from
4Remove powerhead
Disassembly
1To service lockout assembly, remove the retaining pin
[] 2Remove the plunger, spring, tappet, and cam from the housing[] 3Remove two screws securing low oil lightUnclip the lead from the starter housing, then remove the light assembly