1997 Johnson/Evinrude EU 25, 35 HP 3-Cylinder outboards Service Manual, Page 185Get this manual
[] 8Apply OVIC Triple-Guard grease to the inside and outside of the lower bushing CD and install it into the bottom of the swivel bracket[] 9Apply OVIC Gasket Sealing Compound to the outside case of new lower seal Q)Use suitable tool and drive the seal into place until flush with the outside surfaceApply OVIC Triple-Guard grease to the seal lips I1ID
10Apply OVIC Triple-Guard grease to the inside and outside surfaces of the friction block or upper bushing If equipped with friction screw, install the block with the metal plug facing toward the steering friction screw Tighten the friction screw, if equipped, just enough to keep the block in placeOvertightening the friction screw will make installing the steering arm assembly difficult