1997 Johnson/Evinrude EU 25, 35 HP 3-Cylinder outboards Service Manual, Page 151Get this manual
8Place the main engine cables into the motor cover grommet and install in the starboard lower motor coverRoute the cables along the side of the cover back to the electrical bracket [I]
9Connect all connectors and secure to the electrical bracketConnect all ground wires to the ground studSecure with nut tightened to 60-84 inIbs(7-9 Nm) and coat the connection with OMC Black Neoprene
10Install the electrical connector cover and secure with two screwsTighten the screws 24-36 inIbs(3-4 Nm)LL_ _
rn 11cover withthea main engine cable toTighten the screw to Secure the starboard lower motor J-clamp and screw