1997 Johnson/Evinrude EU 25, 35 HP 3-Cylinder outboards Service Manual, Page 143Get this manual
33Secure restraining jaw "G" and forcing jaw "H" to
] 34Tighten the rod cap screws to torque of 25-30 inIbs(2-3 Nm)35Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using the following procedure:
Position frame onto the connecting rod so the contact area of the jaw is centered in the side of the rod
Tighten forcing screw until jaws contact connecting rod
frame down until adjustment stop contacts the connecting rodThe groove lines on the jaws must be centered on the rodcrankpin diameter