1997 Johnson/Evinrude EU 25, 35 HP 3-Cylinder outboards Service Manual, Page 130Get this manual
3Unscrew the six lower motor cover screws
[[] 11 4Remove the port side lower motor cover enough to cut
the tie strap securing the fuel hose to the fuel connectorRemove the fuel hoseUse caution as there might be fuel under pressure in the hoseCatch any fuel in the hose in suitable containerwires to the starboard side lower motor cover
UID 5Remove the J-clamp and screw securing the electrical
6Remove the two screws securing the electrical connector cover to the engineRemove the cover7Unplug all six electrical connectorsMark their location for installationRemove any ground wires ofthe engine harness from the ground stud 8Remove the engine harness and grommet from the lower motor coverRemove the starboard side lower motor cover from the engine