1997 Johnson/Evinrude EU 25, 35 HP 3-Cylinder outboards Service Manual, Page 129Get this manual
16Unplug the low oil light 2-pin Amphenol connector
rn 17Remove powerheadRemovesecuring the manual starter the three screws assembly to the the assemblyW&
18Attach OMC Lifting Eye, PIN 396748, to the flywheel and tighten the screws only enough to ensure thread engagement
INote Threading the lifting eye screws in too far into the flywheel
will damage components mounted to the underside of the flywheel39201
19Remove the seven screws the exhaust housing
securing the powerhead to
[] 20With the weight of the powerhead supported by hoist, pry the powerhead from the exhaust housingRemove the powerheadDiscard the gasket and clean both gasket surfaces