1997 Johnson/Evinrude EU 25, 35 HP 3-Cylinder outboards Service Manual, Page 114Get this manual
Ohmmeter TestStop Button
Notel All ohmmeter tests must be performed with the engine NOT running
1The steering handle contains combination stop buttonemergency stop device When the clip and lanyard assembly is removed, the emergency stop device is in the STOP position When the clip and lanyard assembly is installed, the emergency stop device is in the RUN position To stop the engine when the clip and lanyard assembly is in place, press the stop button until the engine stops
2Install the clip and lanyard
m button and ignition moduleConnect meterscaleDisconnectstop button terminal "B", andbetween 3Calibrate an ohmmeter on appropriate 4-pin Amphenol connector stop leads between clean